17. IS5332PTS

Specialty Models, Shower Pans & Bases
Model#: IS5332PTS Open Top Pediatric Tub/Shower
pediatric
Aqua Bath’s Pediatric Tub/Shower is molded from a single sheet of Lucite® cast acrylic without any joints or seams. The advantages of this one-piece construction is greater rigidity, lessens pre-installation damage, cuts costly maintenance and best of all, there isn’t places for mold to grow.

The enclosure inside dimensions are 45″ wide x 32″ deep x 74″ height. The outside dimensions are 53″ wide x 33″ deep x 76″ height. The unit should have a backside flame spread of less than 30 (class B). Has two molded soap trays on back wall 50″ above the floor and one centered on back wall 40″ above floor. The unit has two 24″ grab bars on back wall, two 12″ grab bars on end walls and a ribbed floor for slip resistance. The approximate weight of the unit is 275 pounds.

Meets ANSI Z124.1 and is designed to meet NAHB (National Association of Home Builders). This shower is not ADA Compliant. See our products for ADA Compliant tub and shower units.

Options:

Seat Options:
• Removable Lift-Out Seat
• Convertible Fold-Up Seat
• Factory Installed Fold-Up Seat

• Hand-Held Shower Set
• 24″ or 30″ Slide Bar
• Pressure Balance or Thermostatic Control Valve
• Antibacterial Shower Curtain With Hooks
• Dial Thermometer
• Waste & Overflow
• Diverter Spout
• ASTM F462 Non-Slip Bottom
• Stainless Steel Bars

< Previous | Products | Product PDFs | Next >